Serving the Providence area  ·  (401) 414-3310  ·  Open Mon-Sun 7am-7pm
📞 (401) 414-3310 Free Quote

Metal Roofing in Woonsocket, RI (02895) · Local Professionals

Providence Metal Roofing · Fast response in Woonsocket and the Providence area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+250Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Woonsocket is a mill city, and its roofs show it. Three-deckers on the hills above the Blackstone River, brick mills along the valley floor, and older frame houses packed tight on narrow lots. The snow piles up here more than it does down in Providence, and ice dams are a real problem on the low-slope roofs that cover so many of these buildings.

We are Providence Metal Roofing, and we serve Woonsocket from our base in Providence. Homeowners and property managers in 02895 call us because we understand the housing stock here: the flat and low-slope roofs on triple-deckers, the steep pitches on Victorian-era houses near Market Square, and the way nor'easters and freeze-thaw cycles work on metal. We install, repair, and replace metal roofs, and we do it with fasteners and coatings that hold up to the salt air and the snow.

Metal Roofing in Woonsocket (02895)

Woonsocket sits in a snowier pocket than the rest of Rhode Island, and that changes how we approach every roof. The city's three-deckers and mill buildings often have low-slope or flat roofs where water ponds and ice dams form at the eaves. Older frame houses on the hillsides have steep pitches and complicated rooflines with dormers and chimneys. Lots are narrow, and access can be tight, especially in the neighborhoods off Social Street and around the old mill villages. We plan for that: where we stage materials, how we get equipment in, and how we protect the neighbor's property.

Our team has worked on roofs across Providence and the surrounding areas, from Federal Hill to Pawtucket and up into Woonsocket. We know the local building department, we know what permits are required for a full replacement, and we know how to document storm damage for an insurance claim. We are fully insured with general liability and workers' compensation, and we use fasteners and coatings rated for this climate.

Our services in Woonsocket

How a Job Works in Woonsocket

Step 1: You call us at (401) 414-3310 or request a free estimate online. We schedule a time to come out and look at your roof. We will check the condition of the existing roof, look for leaks, ice dam evidence, and failing fasteners, and talk with you about what you want. You get a written estimate with options, not pressure.

Step 2: Once you approve the estimate, we pull the permit from the Woonsocket building department and schedule the work. On tight lots, we plan where to put the dumpster and materials so we do not block your driveway or the neighbor's. If your house is in a historic district or under HOA review, we help you get the color and profile approved before we order materials. We remove the old roof, inspect the decking, and install the new metal roof with ice and water shield at the eaves and proper flashing around chimneys and skylights.

Step 3: When we finish, we clean up. We magnet-sweep the yard and driveway for nails, haul away all debris, and walk the roof with you to show you the work. We do not leave until you are satisfied.

Metal roofing in Woonsocket is priced by the square foot, and the final number depends on the size of your roof, its pitch and complexity, how many layers we need to remove, and whether there is rot or damage underneath. For a basic corrugated or ribbed panel roof, you are looking at around $5.50 per square foot. Standing seam runs from $10 per square foot, and a full replacement with metal shingles or stone-coated steel starts around $9 per square foot. If you are retrofitting over existing shingles, that starts at $7 per square foot, but local code limits how many layers you can cover. Repairs start at $450, and snow guards start at $1,200. We give free estimates, so call (401) 414-3310 and we will give you a real number for your roof.

My three-decker near Market Square has a low-slope roof that leaks every winter. Can metal roofing help?
Yes. Low-slope roofs on Woonsocket three-deckers are prone to ice dams and ponding water. We often recommend a standing seam metal roof with a proper ice and water shield at the eaves and increased insulation and ventilation. Metal sheds snow better than asphalt, and the seams are raised, so water does not sit and find its way in. We will assess your roof and give you options that fit the building.
A nor'easter just peeled back some panels on my roof. How fast can you get out to Woonsocket?
We prioritize storm damage. Call us at (401) 414-3310 and we will schedule a free inspection as soon as possible. If there is an active leak, we can do temporary repairs to prevent further damage, then give you a full estimate for permanent repairs or replacement. We document everything for your insurance claim.
What does a metal roof replacement cost for a typical Woonsocket house?
Most full replacements fall between $9 and $14 per square foot installed, depending on the material and the complexity of the roof. A simple gable roof on a small Cape Cod will be less than a complex roof on a Victorian with dormers and multiple valleys. We give free estimates and will break down the cost so you know what you are paying for.
Do I need a permit to replace my roof in Woonsocket?
Yes, a full roof replacement typically requires a permit from the Woonsocket Building Department. We handle the permit application for you. Rules vary by project, so we confirm the requirements with the city before we start. If your home is in a historic district, there may be additional design review.
My neighbor's tree branches hang over my roof. Who is responsible for damage?
In Rhode Island, you generally have the right to trim branches that overhang your property line, but you should check with a lawyer before doing anything that could harm the tree. If a branch falls and damages your roof, your insurance may cover it. We can inspect and repair the damage, and we can install snow guards or stronger fasteners to reduce future risk.
Are you fully insured for work in Woonsocket?
Yes. We carry general liability insurance and workers' compensation coverage.
How often should I have my metal roof inspected in Woonsocket?
We recommend an inspection every two to three years, and after any major storm. Woonsocket gets more snow and ice than the coast, so ice dams and freeze-thaw cycles can loosen fasteners and open seams. A quick inspection can catch small problems before they become leaks. We offer free estimates for inspections and repairs.
Why choose us?

Trusted professionals in Providence

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Providence

All your work handled by qualified professionals in Providence

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

250+ Verified Client Reviews in Providence

⭐⭐⭐⭐⭐ 4.9/5 · 250 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Providence · Response within 24h · No commitment · ☎ (401) 414-3310

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Providence ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm