Serving the Providence area  ·  (401) 414-3310  ·  Open Mon-Sun 7am-7pm
📞 (401) 414-3310 Free Quote

Metal Roofing in Cranston, RI (02920) · Local Professionals

Providence Metal Roofing · Fast response in Cranston and the Providence area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+250Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Cranston's 1940s to 1960s Cape Cods and brick ranches are solid, but the asphalt shingles on top of them are often on their second or third life. Drive through neighborhoods off Park Avenue or down near Roger Williams Park and you'll see the curling, granule loss, and moss that come with fifty or sixty Rhode Island winters.

We're Providence Metal Roofing, based just up the road in Providence and working Cranston jobs every week. Homeowners in 02920 call us when a shingle roof starts leaking at the chimney flashing, when an ice dam backs water into the eaves, or when they're ready to stop patching and put on a roof that handles nor'easters and bay air without constant attention.

Metal Roofing in Cranston (02920)

Cranston is mostly low, flat-to-rolling ground, but the housing stock is what shapes the work. The brick ranches and Capes common around Garden City and the Western Cranston neighborhoods have simple gable roofs with moderate pitch, which makes a metal roof over shingles retrofit straightforward and cost-effective. Older homes closer to Pawtuxet Village and Edgewood sit on tighter lots with mature oaks and maples that drop limbs and fill gutters, so we pay close attention to fastener placement, panel clearance, and gutter sizing. Near the Providence line and along Narragansett Bay, salt-laden air is hard on cheap fasteners and coatings, so we spec corrosion-resistant screws and finishes that hold up. The freeze-thaw cycles here also mean ice dams at the eaves are a real concern on north-facing slopes, and we often recommend snow guards and proper underlayment to keep meltwater from backing up under the panels.

Our team has worked on everything from three-deckers and mill housing to ranches and colonials across Cranston and the surrounding Providence area. We know what the local building department looks for and how to keep a job moving without surprises.

Our services in Cranston

How a Job Works in Cranston

Step 1: You call (401) 414-3310 or send a request, and we set up a free on-site assessment. We walk the roof, check the deck and flashing, look at attic ventilation if we can get to it, and talk through whether a repair, a retrofit over your existing shingles, or a full replacement makes the most sense for your house and budget. You get a written estimate with clear line items, not a ballpark over the phone.

Step 2: Once you approve, we pull the required Cranston roofing permit and schedule the work. On tighter lots near Pawtuxet Village or in the older neighborhoods, we plan material staging and dumpster placement so we don't block driveways or neighbors' access. If your home is in a historic district or under HOA design review, we help coordinate the panel profile and color approval before anything is ordered. Most residential roofs take a few days depending on size and complexity.

Step 3: We clean up every day and do a final walkthrough with you. Magnets go over the lawn and driveway for screws and nails, gutters get checked, and we make sure you know how the new roof sheds water and what to watch for. We leave your property clean and walk you through the finished job before we call it done.

Pricing in Cranston depends on roof size, pitch, access, and what's underneath. As a ballpark, metal roof installation starts around $8 per square foot, standing seam around $10, metal roof replacement around $9, and a metal roof over shingles retrofit around $7. Corrugated and ribbed panel roofing starts around $5.50 per square foot, and metal shingle or stone-coated steel runs about $9. Smaller jobs like metal roof repair or leak repair start around $450, screw replacement and re-fastening around $750, and flashing, chimney, or skylight repair around $600. Snow guards and ice protection start around $1,200, and gutters for metal roofs run about $9 per linear foot. Every house is different, so call (401) 414-3310 for a free estimate and a real number for your property.

My 1950s ranch near Garden City has two layers of shingles. Can you install metal over them?
Often yes, as long as the existing shingles are sound and the deck is in good shape. Rhode Island code limits how many layers you can recover over, and we check that during the free assessment. If the shingles are curling badly or the deck is soft, we'll recommend a tear-off instead. A retrofit saves on disposal costs and can be a good fit for a simple gable roof like many Cranston ranches.
A nor'easter peeled back some panels on my roof. How fast can you get out to Cranston?
Storm and wind damage calls get priority. Call (401) 414-3310 and we'll schedule a free inspection as soon as possible, usually within a day or two depending on volume. We can tarp or secure an active leak temporarily and then give you a written repair estimate. We also document damage for insurance claims, though coverage decisions are up to your insurer.
What does a typical metal roof cost for a Cranston Cape Cod?
For a modest Cape, a metal roof over shingles retrofit often lands in the range of a few thousand to low five figures depending on square footage and panel choice. Standing seam costs more than corrugated panels, and complex rooflines with dormers or multiple valleys add labor. The best way to know is a free on-site estimate at (401) 414-3310, where we measure and give you exact figures.
Do I need a permit for a metal roof in Cranston, and who handles it?
Roofing permits are commonly required for a full replacement or re-roof in Cranston, and requirements can vary by project. We pull the permit for you as part of the job and coordinate the inspection. For specifics on current rules and fees, check the City of Cranston website or call the building department directly, since requirements can change.
My neighbor's tree drops limbs on my roof. What are my options if a branch damages the metal?
First, document the damage with photos and call us at (401) 414-3310 for a free inspection. Metal roofs handle fallen limbs better than shingles, but a punctured panel or bent seam still needs repair. On property lines, Rhode Island generally allows you to trim branches overhanging your property, but check local rules and talk to your neighbor first. If you're in an HOA, review the covenants before making changes.
Are you fully insured for work on my Cranston property?
Yes. We carry general liability insurance and workers' compensation coverage.
What maintenance does a metal roof need in Cranston's climate?
Not much compared to shingles, but a yearly check helps. Look for loose or backed-out screws, debris in valleys and gutters, and any sealant that's cracked around flashing or penetrations. Ice dams can still form at the eaves on north slopes, so keep gutters clear in winter and consider snow guards if you don't have them. We offer inspections and tune-ups, and a quick call to (401) 414-3310 can catch small issues before they become leaks.
Why choose us?

Trusted professionals in Providence

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Providence

All your work handled by qualified professionals in Providence

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

250+ Verified Client Reviews in Providence

⭐⭐⭐⭐⭐ 4.9/5 · 250 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Providence · Response within 24h · No commitment · ☎ (401) 414-3310

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Providence ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm