Serving the Providence area  ·  (401) 414-3310  ·  Open Mon-Sun 7am-7pm
📞 (401) 414-3310 Free Quote

Metal Roofing in Cumberland Hill, RI (02838) · Local Professionals

Providence Metal Roofing · Fast response in Cumberland Hill and the Providence area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+250Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Cumberland Hill is a hilltop neighborhood of mostly 1920s to 1950s Capes, colonials, and brick ranches, with wooded lots that slope down toward the Blackstone Valley and quick access to Diamond Hill Road and the Route 295 interchange. The housing stock here is solid but many roofs are original or on their second layer, and the freeze-thaw cycles along these hills put real stress on flashing and fasteners.

Homeowners in Cumberland Hill (02838) call Providence Metal Roofing because we know how these older homes handle metal. We have replaced asphalt and slate roofs with metal shingles and standing seam on streets off Mendon Road and near Cumberland Hill Elementary, and we understand the ice damming that shows up on north-facing slopes after a wet snow.

Metal Roofing in Cumberland Hill (02838)

Cumberland Hill sits on high ground north of Pawtucket, and that elevation matters. Winter wind hits exposed ridges harder here, and the freeze-thaw cycle is more aggressive than down in the valley. Many Capes and colonials on these lots have steep pitches and complex rooflines with dormers and valleys, which means more flashing points and more chances for leaks if the detailing is not right. The wooded lots also mean tree limbs and pine needles, and we often find gutters packed with debris that has backed up under the first course of shingles. Access can be tight on the older streets where driveways are narrow and mature trees line the property line, so we plan staging carefully and protect landscaping.

Our team has worked throughout Providence and the surrounding areas, including Cumberland Hill, and we bring that experience to every roof. We know which panel profiles and colors look right on a Cape versus a brick ranch, and we know how to handle the permit process through the local building department. Whether you need a full replacement, a retrofit over existing shingles, or a repair after a storm, we treat your home like it is in our own neighborhood.

Our services in Cumberland Hill

How a Job Works in Cumberland Hill

Step 1: You call us at (401) 414-3310 or request a free estimate online. We schedule an on-site assessment at your Cumberland Hill property, usually within a few days. We inspect the roof, attic, and flashing, take measurements, and talk through options like metal shingle, standing seam, or a retrofit over your current shingles. You get a written estimate with clear pricing before any work begins.

Step 2: Once you approve, we pull the required permits through the local building department and schedule the work. On tight lots off Diamond Hill Road or near the elementary school, we coordinate deliveries and dumpster placement to keep the street clear. If your home is in an HOA or historic district, we help with the design review paperwork. Our crew removes the old roof, inspects and repairs the decking, and installs the new metal roof with proper underlayment and ice-and-water shield at the eaves.

Step 3: After installation, we clean the site thoroughly, using magnets to pick up nails and debris. We walk the roof and gutters with you, show you the finished work, and make sure you are satisfied. We leave your property clean and your roof ready for New England weather.

Pricing for metal roofing in Cumberland Hill depends on the size and pitch of your roof, the condition of the decking, access, and the material you choose. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and metal roof replacement at $9 per square foot. A retrofit over existing shingles starts at $7 per square foot. For repairs, metal roof leak repair starts at $450, screw replacement and re-fastening at $750, and flashing, chimney, or skylight repair at $600. Metal shingle and stone-coated steel both start at $9 per square foot, and copper or specialty metal at $20 per square foot. Coating and painting start at $2.50 per square foot. These are starting prices, and your free estimate will give you an exact figure for your Cumberland Hill home. Call (401) 414-3310 to schedule.

My Cape Cod on a hill in Cumberland Hill gets ice dams every winter. Can a metal roof help?
Yes. Metal roofs shed snow more readily than asphalt, especially on steeper pitches, and we install ice-and-water shield at the eaves and in valleys to protect against backup. We also check attic insulation and ventilation, since warm air leaking into the attic is often the root cause. For homes on the higher elevations here, we often recommend snow guards to keep snow from sliding off in sheets.
A storm just lifted some panels on my roof in Cumberland Hill. How fast can you respond?
We offer free storm and wind damage inspections and prioritize emergency repairs. Call us at (401) 414-3310 and we will schedule an inspection as soon as possible, usually within 24 to 48 hours depending on weather. We can secure the roof temporarily if needed and provide documentation for your insurance claim.
What does a typical metal roof replacement cost for a 1,500 square foot ranch in Cumberland Hill?
For a ranch that size with a simple gable roof, a metal roof replacement might start around $9 per square foot, so roughly $13,500 for materials and labor, but complex rooflines, dormers, or steep pitches can increase that. We give you a detailed written estimate after inspecting your roof, so you know exactly what to expect.
Do I need a permit to replace my roof in Cumberland Hill, and who handles it?
Yes, roofing permits are commonly required for a full replacement or re-roof, and the rules vary by jurisdiction. We handle the permit application through the local building department and schedule inspections as required. We stay current on local requirements, so you do not have to worry about the paperwork.
My neighbor and I share a property line, and I want a metal roof that might overhang slightly. What are the rules?
Property line setbacks and overhang rules are set by local zoning, and we can help you understand what is allowed. If your home is in an HOA, we also help with design review approval for panel profile and color. We recommend talking with your neighbor early and getting any agreements in writing before work starts.
Are you insured for work on my Cumberland Hill home?
Yes, we are fully insured with general liability and workers' compensation coverage.
What maintenance does a metal roof need in Cumberland Hill's climate?
Metal roofs are low maintenance, but in this climate we recommend annual inspections, especially after winter. Check for loose fasteners, debris in valleys and gutters, and any signs of flashing wear. We offer free estimates for inspections and can perform screw replacement and re-fastening if needed. Keeping trees trimmed back from the roof also helps prevent damage.
Why choose us?

Trusted professionals in Providence

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Providence

All your work handled by qualified professionals in Providence

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

250+ Verified Client Reviews in Providence

⭐⭐⭐⭐⭐ 4.9/5 · 250 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Providence · Response within 24h · No commitment · ☎ (401) 414-3310

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Providence ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm