Serving the Providence area  ·  (401) 414-3310  ·  Open Mon-Sun 7am-7pm
📞 (401) 414-3310 Free Quote

Metal Roofing in Tiverton, RI (02724) · Local Professionals

Providence Metal Roofing · Fast response in Tiverton and the Providence area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+250Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Tiverton is a coastal town where salt air and nor'easters test every roof, from the shore cottages along the Sakonnet River to the farmhouses set back off Main Road. The housing stock here is a mix of older capes, ranches, and summer homes, many with low-slope roofs or original asphalt shingles that are showing their age.

Homeowners in 02724 call Providence Metal Roofing because we understand what salt spray and freeze-thaw cycles do to fasteners and flashing. We have worked on roofs near the Sakonnet River and in the Four Corners area, and we know how to spec materials that hold up in this environment.

Metal Roofing in Tiverton (02724)

Tiverton's terrain ranges from the flat, marshy edges near Nanaquaket Pond to the gentle hills off Bulgarmarsh Road. Many properties have tight lot lines, mature trees, and a mix of sand and loam that can affect drainage around the foundation. The salt air is the biggest challenge: it corrodes cheap fasteners and thin coatings quickly, especially on roofs within a mile of the Sakonnet River or Mount Hope Bay. We often recommend stone-coated steel roofing for its ability to mimic shingles while resisting salt, and metal roof coating and painting to extend the life of existing metal roofs. Ice dams are common on north-facing slopes, and nor'easters can lift panels if seams or fasteners are compromised.

Our team has installed and repaired metal roofs across Tiverton and the surrounding Providence area, including historic homes near Tiverton Four Corners and newer construction off Fish Road. We know the local building department's permit process and can help you navigate any historic district or HOA requirements.

Our services in Tiverton

How a Job Works in Tiverton

Step 1: Call us at (401) 414-3310 or request a free estimate online. We will schedule an on-site assessment at your convenience, inspect your roof and attic, and discuss your options. You will get a written estimate with clear pricing and material choices.

Step 2: Once you approve, we pull the necessary permits from the Tiverton building department and schedule the work. For tight lots or homes with steep driveways, we plan material delivery and staging carefully to avoid disrupting neighbors. If your home is in a historic district, we coordinate with the design review board on panel profiles and colors.

Step 3: After installation, we clean up thoroughly, haul away all debris, and walk the property with you to ensure everything meets your expectations. We do not leave until you are satisfied.

Metal roofing in Tiverton starts at $8 per square foot for basic installation, with standing seam from $10 per square foot and metal roof replacement from $9 per square foot. For a typical 1,500 square foot ranch, that means a ballpark of $12,000 to $15,000 for installation, depending on roof complexity, access, and material. Repairs start at $450, and leak repairs are also from $450. Screw replacement and re-fastening starts at $750. Coating and painting starts at $2.50 per square foot, a cost-effective option for existing metal roofs. Prices vary with roof size, pitch, number of penetrations, and urgency. Call (401) 414-3310 for a free, no-obligation estimate tailored to your Tiverton home.

My house is near the Sakonnet River and the salt air has corroded the fasteners on my metal roof. Can you replace just the screws?
Yes. Screw replacement and re-fastening is a common job for us in Tiverton. We use corrosion-resistant screws and washers designed for coastal environments. We will inspect the panels and sealing washers, replace failed fasteners, and check for any loose seams or flashing. If the panels themselves are still sound, this can extend the roof's life significantly. Call us at (401) 414-3310 to schedule an inspection.
A nor'easter just blew through and lifted some panels on my roof. How quickly can you respond for storm damage repair in Tiverton?
We prioritize storm damage calls. In most cases, we can inspect the damage within 24 to 48 hours, and we offer free inspections for storm and wind damage. We will secure any loose panels to prevent further water intrusion and provide a written repair estimate. Call (401) 414-3310 and we will get someone out to your Tiverton property as soon as possible.
What is the typical cost to replace a roof on a 1,200 square foot ranch in Tiverton with standing seam metal?
For a 1,200 square foot ranch with a simple gable roof, standing seam metal roofing typically runs between $12,000 and $16,000, depending on pitch, number of penetrations, and whether we need to remove the old roof. That is based on our starting rate of $10 per square foot for standing seam. We provide free estimates so you can get an exact price for your home.
Do I need a permit to replace my roof in Tiverton, and how long does it take?
Yes, a building permit is generally required for a full roof replacement in Tiverton. The exact requirements and fees are set by the Tiverton building department, and we recommend confirming with them directly. We handle the permit application for you and schedule inspections as required. Permit timing can vary, but we plan for it in your project timeline.
My neighbor's tree branches hang over my roof. Can I trim them, and does my HOA need to approve a metal roof color?
Property line and tree trimming rules in Rhode Island generally allow you to trim branches that overhang your property, but it is best to check local ordinances or consult an attorney if there is a dispute. For HOA approval, many associations in Tiverton have design guidelines for roof color and material. We can provide color samples and documentation to help you get approval before we order materials.
Are you fully insured for roofing work at my Tiverton home?
Yes, Providence Metal Roofing is fully insured, carrying both general liability and workers' compensation coverage. We are happy to provide a certificate of insurance upon request so you can verify our coverage before work begins.
What maintenance should I do each year to protect my metal roof from salt air and winter ice in Tiverton?
We recommend an annual inspection, ideally in late summer or early fall, to check for loose fasteners, damaged seals, and debris buildup in valleys and gutters. After winter, look for signs of ice damming or corrosion. A coating or painting every 10 to 15 years can help protect against salt air. We offer free estimates for inspections and maintenance plans.
Why choose us?

Trusted professionals in Providence

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Providence

All your work handled by qualified professionals in Providence

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

250+ Verified Client Reviews in Providence

⭐⭐⭐⭐⭐ 4.9/5 · 250 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Providence · Response within 24h · No commitment · ☎ (401) 414-3310

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Providence ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm