Serving the Providence area  ·  (401) 414-3310  ·  Open Mon-Sun 7am-7pm
📞 (401) 414-3310 Free Quote

Metal Roofing in Providence, RI (02903) · Local Professionals

Providence Metal Roofing · Fast response in Providence and the Providence area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+250Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Providence is a city of tight streets and old roofs, from the Federal and Victorian houses on College Hill to the three-deckers packed into Federal Hill and Olneyville. The housing stock here is old, the lots are narrow, and the salt air off Narragansett Bay works on every fastener and flashing. If your roof is failing, you need someone who knows how these buildings are put together.

Homeowners in 02903 and across the East Side call Providence Metal Roofing because we understand what nor'easters, freeze-thaw cycles, and ice dams do to a roof in this city. We have worked on everything from Cape Cods in Cranston to mill housing in Central Falls, and we know the difference between a roof that looks fine and one that will hold up through the next storm.

Metal Roofing in Providence (02903)

Providence sits at the head of Narragansett Bay, and that location drives the work. The salt air corrodes cheap fasteners and thin coatings, so we spec materials that can take it. The city's older neighborhoods have narrow lots and tight access, which means staging materials and getting equipment in and out takes planning. On College Hill and the East Side, you have historic homes where panel profile and color matter, and where a change to the roofline can trigger design review. Down in the mill villages along the Blackstone and Pawtuxet valleys, you have frame housing with low-slope roofs that need different detailing than a steep Victorian. And everywhere, the freeze-thaw cycles and ice damming at the eaves are real concerns. We have seen what happens when a roof is not detailed for this climate: separated seams, backed-out screws, and leaks that show up in the attic long after the storm.

Our team has worked across Providence and the surrounding areas, from the three-deckers of the West End to the shingle-style cottages toward Tiverton. We know the local building departments, the inspection timelines, and the common failure points on these roofs.

Our services in Providence

How a Job Works in Providence

Step 1: You call us at (401) 414-3310 or fill out the form, and we schedule a free on-site assessment. We look at the roof, the attic, the flashing, and the drainage, and we give you a written estimate that explains what needs to be done and why.

Step 2: Once you approve the estimate, we pull the permit if one is required and schedule the work. On tight lots in Providence, we plan the staging and material delivery carefully so we do not block your neighbors or damage landscaping. If your home is in a historic district or under HOA review, we help coordinate the paperwork and make sure the panel profile and color meet the requirements.

Step 3: After the work is done, we clean up the site completely, haul away all debris, and do a final walkthrough with you. We do not leave until you are satisfied and the roof is watertight.

Pricing in Providence depends on the size and pitch of your roof, the material you choose, and the condition of the existing roof. For a typical residential roof, metal roof installation starts around $8 per square foot, standing seam starts around $10 per square foot, and metal roof replacement starts around $9 per square foot. If you are going over existing shingles, a retrofit starts around $7 per square foot. Repairs start at $450, and screw replacement and re-fastening starts at $750. Smaller jobs like flashing or skylight repair start at $600. The biggest cost factors are roof size, access, and how much prep work the existing roof needs. We give free estimates and explain the numbers clearly, so call (401) 414-3310 to get started.

My three-decker in Federal Hill has a low-slope roof that keeps leaking at the seams. Can metal roofing fix that?
Yes. Low-slope roofs on three-deckers are common in Federal Hill and the West End, and they often fail at the seams and flashing. We install standing seam and corrugated panels that are designed for low slopes, with proper underlayment and seam details that handle the freeze-thaw cycles here. We also check the drainage and make sure the gutters are sized correctly.
A nor'easter just lifted some panels on my roof in Providence. How fast can you respond?
We offer free storm and wind damage inspections and prioritize emergency repairs. Call us at (401) 414-3310 and we will schedule a visit as soon as possible. We can secure the roof temporarily if needed and give you a written estimate for the permanent repair.
What does a metal roof cost for a typical Cape Cod in Cranston or East Providence?
Most Cape Cods in those areas run between 1,200 and 1,800 square feet of roof area. At our starting prices, that puts metal roof installation in the range of $9,600 to $14,400, and standing seam in the range of $12,000 to $18,000. The exact price depends on the pitch, the number of penetrations, and whether we need to remove the old roof. We give free estimates.
Do I need a permit for a metal roof replacement in Providence?
Yes, a permit is commonly required for a full replacement or re-roof in Providence. The rules and fees vary by jurisdiction, so it is best to check with the city. You can find information on the City of Providence website at https://www.providenceri.gov/. We handle the permit application for you as part of the job.
My neighbor's tree branches hang over my roof, and I am worried about property lines. What should I do?
Property line issues with overhanging branches are common in Providence's older neighborhoods. In general, you have the right to trim branches that overhang your property, but it is best to talk to your neighbor first. If your roof is in a historic district or under an HOA, check the rules before making changes. We can inspect your roof and document any damage from branches.
Are you insured for work on my Providence property?
Yes, we are fully insured with general liability and workers' compensation coverage.
What maintenance does a metal roof need in Providence's climate?
Metal roofs are low maintenance, but in Providence's salt air and freeze-thaw cycles, we recommend an annual inspection. Check for loose fasteners, debris in valleys and gutters, and any signs of corrosion. We offer free inspections and can replace screws and re-fasten panels as needed to keep the roof watertight.
Why choose us?

Trusted professionals in Providence

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Providence

All your work handled by qualified professionals in Providence

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

250+ Verified Client Reviews in Providence

⭐⭐⭐⭐⭐ 4.9/5 · 250 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Providence · Response within 24h · No commitment · ☎ (401) 414-3310

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Providence ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm