Serving the Providence area  ·  (401) 414-3310  ·  Open Mon-Sun 7am-7pm
📞 (401) 414-3310 Free Quote

Metal Roofing in Pawtucket, RI (02860) · Local Professionals

Providence Metal Roofing · Fast response in Pawtucket and the Providence area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+250Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Pawtucket is a city of three-deckers, old mill buildings, and bungalows, where the Blackstone River meets the bay and the housing stock tells a story of two centuries. If you own one of these homes, you know the roof takes a beating from nor'easters, ice dams, and salt air.

Providence Metal Roofing is based just down the road in Providence, and we've spent years working on Pawtucket roofs from Woodlawn to Darlington. Whether it's a leaky flat roof on a triple-decker near Slater Mill or a standing seam upgrade on a Cape Cod in Fairlawn, we know the local building stock and the weather that tests it.

Metal Roofing in Pawtucket (02860)

Pawtucket's mix of dense neighborhoods and old industrial buildings creates specific roofing challenges. Many three-deckers have low-slope or flat roofs with minimal pitch, which means water pools and seams fail. Mill buildings often have large, flat expanses where a metal retrofit can add decades of life. The city's older homes frequently have multiple layers of asphalt shingles, and building code limits how many layers you can add before a full tear-off is required. Our team understands these constraints and can help you decide between a metal roof over shingles (retrofit) or a full replacement.

We also deal with the freeze-thaw cycles that hit Pawtucket hard in winter. Ice dams form at the eaves, and cheap fasteners corrode quickly in the salt-laden air coming off Narragansett Bay. That's why we use high-quality screws and finishes that hold up. Whether you're near the Pawtucket Country Club or in the Quality Hill historic district, we tailor the installation to your property's needs.

Our experience serving Pawtucket and the Providence area means we've seen it all: wind-lifted panels after a storm, leaks around chimneys and skylights, and failed flashing on old mill roofs. We bring that knowledge to every job.

Our services in Pawtucket

How a Job Works in Pawtucket

Step 1: Call us at (401) 414-3310 or request a free estimate online. We'll schedule an on-site assessment at your Pawtucket property, inspect the roof, discuss your options, and provide a written estimate. We'll also check for any permit requirements with the city.

Step 2: Once you approve, we order materials and schedule the work. In Pawtucket, access can be tight on narrow lots, so we plan for that. If your home is in a historic district, we'll coordinate with you on design review. We handle the permit application with the city and keep you informed on timing.

Step 3: After installation, we clean up thoroughly, haul away old materials, and do a final walkthrough with you. We make sure you're satisfied and understand how to care for your new metal roof. We leave your property clean and your roof ready for whatever New England weather brings.

Pricing for metal roofing in Pawtucket depends on the job. For a typical three-decker with a flat roof, metal roof replacement starts around $9 per square foot, while a standing seam roof runs about $10 per square foot. If you're retrofitting over existing shingles, costs start at $7 per square foot. Smaller jobs like metal roof repair or leak repair start at $450. Factors that affect cost include roof size, access (tight lots may require special equipment), the condition of the existing roof, and urgency. We offer free estimates, so call (401) 414-3310 to get a accurate quote for your Pawtucket home.

My three-decker in the Woodlawn neighborhood has a flat roof that's leaking. Can you repair it or do I need a full replacement?
We can assess whether a repair will suffice or if a full replacement is needed. Flat roofs on three-deckers often have multiple layers and may be near the end of their life. We'll inspect and give you honest options, including metal roof replacement or a retrofit.
A nor'easter just lifted some panels on my roof in Pawtucket. How quickly can you respond?
We prioritize storm damage calls. Call (401) 414-3310 and we'll schedule an inspection as soon as possible, often within 24-48 hours depending on demand. We can tarp or secure the roof to prevent further damage.
What's the typical cost to replace a metal roof on a bungalow in Darlington?
For a bungalow, metal roof replacement typically starts around $9 per square foot, but the exact cost depends on roof size, pitch, and accessibility. We provide free estimates so you know exactly what to expect.
Do I need a permit to replace my roof in Pawtucket, and how do I find out about historic district rules?
Yes, roofing permits are generally required for replacements. The City of Pawtucket website (https://www.pawtucketri.com/) has contact information for the building department. If your home is in a historic district, design review may be required. We can help guide you through the process.
My neighbor's tree branches hang over my roof. What are my rights if I need to trim them for roof work?
In Rhode Island, you generally have the right to trim branches that overhang your property line, but it's best to check local ordinances and communicate with your neighbor. We can advise on access and work with you to ensure the job goes smoothly.
Are you fully insured for roofing work in Pawtucket?
Yes, we carry general liability insurance and workers' compensation coverage for all our crews.
What maintenance does a metal roof need in Pawtucket's climate?
Metal roofs are low-maintenance, but in Pawtucket's freeze-thaw cycles and salt air, we recommend annual inspections to check fasteners and clear debris. We offer maintenance plans and can advise on preventing ice dams.
Why choose us?

Trusted professionals in Providence

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Providence

All your work handled by qualified professionals in Providence

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

250+ Verified Client Reviews in Providence

⭐⭐⭐⭐⭐ 4.9/5 · 250 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Providence · Response within 24h · No commitment · ☎ (401) 414-3310

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Providence ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm