Serving the Providence area  ·  (401) 414-3310  ·  Open Mon-Sun 7am-7pm
📞 (401) 414-3310 Free Quote

Metal Roofing in Newport, RI (02840) · Local Professionals

Providence Metal Roofing · Fast response in Newport and the Providence area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+250Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Newport's Gilded Age mansions on Bellevue Avenue and the colonial-era houses along the Point don't just need a roof; they need a roof that can handle salt air, nor'easters, and the occasional tropical storm. With so many historic homes, harbor cottages, and shingle-style estates, the right metal roofing system makes all the difference in keeping your property protected and looking its best.

At Providence Metal Roofing, we specialize in the kind of roofing Newport demands. From copper accents on a Queen Anne Victorian to stone-coated steel on a waterfront cottage, we know how to match materials to architecture. When you call us at (401) 414-3310, you're talking to a local team that understands Newport's unique building stock, from the historic districts downtown to the breezy streets of the Fifth Ward.

Metal Roofing in Newport (02840)

Newport properties come with their own set of challenges. The salt-laden air from Narragansett Bay corrodes cheap fasteners and coatings, so we use only marine-grade materials and finishes that stand up to the coastal environment. Many homes sit on tight lots with limited access, especially in the historic neighborhoods like the Point and the Hill, where narrow streets and mature trees can make equipment placement tricky. We're used to working around these constraints, planning each job carefully to avoid damage to landscaping and neighboring properties. And with so many historic structures, we often need to coordinate with the Newport Historical District Commission to ensure our work meets preservation standards.

Our team has been serving Newport and the surrounding Providence area for years, and we've seen it all: ice dams forming at the eaves during freeze-thaw cycles, wind-lifted panels after a nor'easter, and leaks from failed flashing around chimneys and skylights. We know the local building department requirements and can help you navigate the permit process. Whether you're in a Victorian mansion on Bellevue Avenue or a cozy cottage near King Park, we have the expertise to get the job done right.

Our services in Newport

How a Job Works in Newport

Step 1: It starts with a call to (401) 414-3310 or a request through our website. We'll schedule a free on-site assessment at a time that works for you. Our estimator will inspect your roof, take measurements, and discuss your options, whether you're considering a full replacement or a repair. We'll also check for any signs of damage from salt air or storms and provide a detailed written estimate.

Step 2: Once you approve the estimate, we'll handle the permitting and scheduling. In Newport, roofing permits are required for most replacements, and we'll make sure everything is filed correctly with the city. If your home is in a historic district, we'll coordinate with the design review board to ensure your new roof meets the guidelines. On the day of installation, our crew will protect your landscaping and set up safely, even on tight lots. We work efficiently to minimize disruption and keep you informed throughout the process.

Step 3: After the work is complete, we do a thorough cleanup, including magnet sweeps for nails and debris removal. We'll walk you through the finished job, answer any questions, and make sure you're completely satisfied. We don't consider a job done until your property is clean and your roof is performing perfectly.

Pricing for metal roofing in Newport varies based on the size and complexity of your roof, the material you choose, and the condition of your existing roof. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and metal roof replacement at $9 per square foot. For repairs, expect starting costs around $450 for leak repairs, and screw replacement and re-fastening starts at $750. Stone-coated steel and metal shingle roofing both start at $9 per square foot, while copper and specialty metal roofing starts at $20 per square foot. These are starting prices, and your actual cost will depend on factors like roof accessibility, the number of layers to remove, and any necessary structural repairs. Call us at (401) 414-3310 for a free estimate tailored to your Newport home.

My house is in the Point neighborhood and has a very steep roof with limited access. Can you still install a metal roof?
Yes, we regularly work on steep roofs in tight historic neighborhoods like the Point. We use specialized equipment and safety harnesses, and we plan the job to minimize disruption. Our team is experienced with the narrow streets and mature trees in that area, so we know how to navigate the logistics safely and efficiently.
How quickly can you respond to storm damage in Newport?
We offer emergency storm and wind damage repair, and we prioritize active leaks and structural damage. Call us at (401) 414-3310, and we'll schedule an inspection as soon as possible, often within 24 to 48 hours depending on demand. We'll provide a free inspection and estimate for any necessary repairs.
What's the typical cost to replace a roof on a Victorian home in Newport?
Replacing a roof on a Victorian home can be more complex due to intricate rooflines and historic preservation requirements. For a metal roof replacement, prices start at $9 per square foot, but the actual cost depends on the roof's size, pitch, and the material you select. We recommend a free on-site estimate to give you an accurate figure.
Do I need a permit to replace my roof in Newport, and how do I get one?
Yes, roofing permits are typically required for replacements in Newport. The City of Newport website has information about the building department and permit process. We can handle the permitting for you, ensuring all paperwork is filed correctly and inspections are scheduled. Rules can vary, so it's always best to check with the city directly.
My neighbor and I share a property line, and I'm worried about the roof overhang. What should I do?
Property line issues can be tricky. We recommend reviewing your property survey and discussing any concerns with your neighbor before work begins. If your home is in an HOA, you may also need approval for the project. We can provide documentation and work with you to ensure the installation respects property boundaries.
Are you fully insured for roofing work in Newport?
Yes, we are fully insured, carrying both general liability and workers' compensation insurance.
What maintenance does a metal roof need in Newport's coastal climate?
In Newport's salt air, we recommend annual inspections to check for loose fasteners, corrosion, or debris buildup. Cleaning gutters and removing leaves and pine needles helps prevent ice dams in winter. We offer maintenance plans and can also apply protective coatings to extend the life of your roof. Call us to schedule a maintenance check.
Why choose us?

Trusted professionals in Providence

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Providence

All your work handled by qualified professionals in Providence

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

250+ Verified Client Reviews in Providence

⭐⭐⭐⭐⭐ 4.9/5 · 250 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Providence · Response within 24h · No commitment · ☎ (401) 414-3310

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Providence ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm