Serving the Providence area  ·  (401) 414-3310  ·  Open Mon-Sun 7am-7pm
📞 (401) 414-3310 Free Quote

Metal Roofing in Westerly, RI (02891) · Local Professionals

Providence Metal Roofing · Fast response in Westerly and the Providence area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+250Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Westerly is a beach town with granite bones. From the salt-washed cottages near Misquamicut to the sturdy colonials and capes on streets off High Street, roofs here take a beating from nor'easters, sea fog, and summer sun. If your roof is showing its age, we can help.

Providence Metal Roofing serves Westerly (02891) and the surrounding area with metal roofing installation, repair, and replacement. We know the local housing stock, from the Victorian-era homes near Wilcox Park to the mid-century ranches out toward Bradford, and we understand what salt air does to fasteners and coatings. That is why homeowners call us when they want a roof that lasts.

Metal Roofing in Westerly (02891)

Westerly properties come with their own set of challenges. The town's proximity to the ocean means salt-laden air that corrodes cheap fasteners and thin coatings, especially on homes within a few miles of the shore. Many lots are tight, with mature trees and narrow driveways, so staging materials and equipment takes planning. The freeze-thaw cycles in winter and ice dams at the eaves are common on older homes with poor attic ventilation. We also see wind-lifted panels after storms, particularly on roofs that were not fastened to current wind standards. Our team is familiar with the building department's permit requirements and can help you navigate the process for a full replacement or re-roof. We also work with historic district guidelines when your home is in a designated area.

Our experience in Westerly and across Providence means we have seen it all, from leaking chimneys on Federal-style homes to screw replacement on corrugated barn roofs. We bring that knowledge to every job, big or small.

Our services in Westerly

How a Job Works in Westerly

Step 1: Call us at (401) 414-3310 or fill out our contact form. We will schedule a free on-site assessment at your Westerly property. We will inspect your roof, discuss your options, and provide a written estimate. No pressure, no gimmicks.

Step 2: Once you approve the estimate, we will pull the necessary permits and schedule the work. For homes in tight neighborhoods like those near downtown Westerly, we plan deliveries and staging to minimize disruption. If your home is in a historic district or HOA, we will coordinate with the review board to ensure the panel profile and color meet the guidelines.

Step 3: After the job is done, we clean up thoroughly and walk the property with you to make sure you are satisfied. We leave your yard as clean as we found it, and we haul away all old materials.

Pricing for metal roofing in Westerly depends on the size and complexity of your roof, the material you choose, and the condition of the existing structure. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and metal roof replacement at $9 per square foot. If you are considering a retrofit over existing shingles, that starts at $7 per square foot. Repairs, including leak fixes, start at $450, and screw replacement starts at $750. We also offer coating and painting from $2.50 per square foot, which is a cost-effective way to extend the life of a metal roof. For a precise quote tailored to your Westerly home, call us at (401) 414-3310. We offer free estimates and transparent pricing.

My beach cottage near Misquamicut has a metal roof with rusted screws. Can you replace the screws and stop the leaks?
Yes. Salt air is hard on fasteners, and we see this often on homes near the shore. Our screw replacement and re-fastening service starts at $750 and includes removing the old screws, inspecting the panels for damage, and installing new corrosion-resistant screws with sealing washers. We also check the flashing and seams while we are up there to make sure the leak is truly fixed.
A nor'easter just blew some panels loose on my roof in Westerly. How quickly can you respond?
We prioritize storm damage calls. Call us at (401) 414-3310 and we will schedule an inspection as soon as possible, often within 24 to 48 hours depending on demand. We can secure the roof to prevent further damage and provide a written estimate for repairs. We also document the damage for insurance purposes if needed.
What does a typical metal roof replacement cost for a ranch-style home in Westerly?
For a ranch-style home, say 1,500 to 2,000 square feet of roof area, a metal roof replacement typically ranges from $13,500 to $18,000 for standard corrugated or ribbed panels, and more for standing seam or specialty metals. The exact cost depends on roof pitch, accessibility, and whether any decking repairs are needed. We provide free estimates so you know exactly what to expect.
Do I need a permit to replace my roof in Westerly, and can you help with that?
Yes, the Town of Westerly requires a permit for roof replacements and some repairs. The requirements and fees are set by the local building department, and we recommend confirming the details with them. We handle the permit application process for you, including submitting plans and scheduling inspections, so you do not have to worry about it.
My neighbor's tree branches hang over my roof. What are my rights, and does the HOA need to approve my new roof color?
Property line issues and overhanging branches are civil matters between neighbors, so we recommend discussing it with your neighbor first. If you are in an HOA, you will likely need approval for the roof color and style. We can provide product samples and specifications to help with your HOA submission. We are happy to coordinate with your HOA to ensure a smooth approval process.
Are you insured for roofing work in Rhode Island?
Yes, we are fully insured with general liability and workers' compensation coverage. This protects you and your property in the unlikely event of an accident during the job.
How often should I have my metal roof inspected in Westerly, and what maintenance does it need?
We recommend an inspection every two to three years, especially after major storms. Salt air and freeze-thaw cycles can loosen fasteners and degrade sealants. A typical maintenance visit includes checking fasteners, seams, flashing, and coatings. Catching small issues early can prevent costly leaks. We offer free estimates for inspections and maintenance.
Why choose us?

Trusted professionals in Providence

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Providence

All your work handled by qualified professionals in Providence

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

250+ Verified Client Reviews in Providence

⭐⭐⭐⭐⭐ 4.9/5 · 250 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Providence · Response within 24h · No commitment · ☎ (401) 414-3310

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Providence ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm