Serving the Providence area  ·  (401) 414-3310  ·  Open Mon-Sun 7am-7pm
📞 (401) 414-3310 Free Quote

Metal Roofing in Newport East, RI (02842) · Local Professionals

Providence Metal Roofing · Fast response in Newport East and the Providence area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+250Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Newport East, ZIP 02842, sits right on the edge of Aquidneck Island, where the salt air off Narragansett Bay chews through cheap fasteners and the fog rolls in thick enough to hide the Pell Bridge. The housing stock here is a mix of 1920s bungalows, mid-century ranches, and newer colonials, many with low-slope roofs that take a beating from nor'easters and freeze-thaw cycles.

Homeowners call Providence Metal Roofing because we know how coastal wind and salt corrosion work on metal roofs. We have replaced rusted-through panels on homes near the Newport East Recreation Area and repaired wind-lifted seams on streets off East Main Road. If your roof is leaking or you are tired of replacing asphalt shingles every 15 years, we give you a straight answer and a solid install.

Metal Roofing in Newport East (02842)

Newport East is not a flat grid of identical lots. You have tight side yards in the older neighborhoods near the Middletown line, steep pitches on some of the Victorians closer to downtown, and low-slope roofs on the ranches and capes that dominate the mid-century sections. The ground is sandy and rocky in places, which affects drainage and how we stage materials. Coastal fog and salt spray mean we always spec fasteners and coatings that resist corrosion, because standard galvanized screws will start rusting within a few years here. Ice damming is a real issue on the north-facing slopes of older homes, and we often find separated seams after a winter of freeze-thaw. We have worked on standing seam, corrugated panels, and metal shingles throughout Newport East, and we understand how to detail flashings around chimneys and skylights so they hold up to the wind-driven rain that comes with a nor'easter.

Our team has been serving Newport East and the greater Providence area for years, and we know the local building department requirements and the historic district rules that can apply to certain properties. We pull the permits, coordinate inspections, and make sure the job is done right the first time.

Our services in Newport East

How a Job Works in Newport East

Step 1: You call us at (401) 414-3310 or fill out our contact form. We schedule a free on-site assessment at your Newport East property, usually within a couple of days. We inspect the roof, check the attic if accessible, and talk to you about what we find. You get a written estimate with options, not a high-pressure sales pitch.

Step 2: Once you approve the estimate, we pull the required permits from the local building department and schedule the work. In Newport East, tight driveways and narrow streets mean we plan material deliveries carefully, and we use a dumpster that fits your lot without blocking neighbors. If your home is in a historic district or HOA, we handle the design review paperwork and make sure the panel profile and color are approved before we order materials. The crew arrives on time, protects your landscaping, and works efficiently to minimize disruption.

Step 3: When the job is done, we do a thorough cleanup, including magnet sweeping for nails and debris. We walk the roof and the ground with you, show you the completed work, and make sure you are satisfied. We do not leave until your property is clean and you have all the documentation you need for your records or insurance.

Pricing for metal roofing in Newport East depends on the size and complexity of your roof, the material you choose, and the condition of the existing roof. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and metal roof replacement at $9 per square foot. If you are retrofitting over existing shingles, that starts at $7 per square foot. Repairs start at $450, and leak repairs also start at $450. Screw replacement and re-fastening starts at $750. For a typical Newport East ranch or cape, a full standing seam roof might run between $12,000 and $20,000, but we give you an exact quote after inspecting your roof. Call (401) 414-3310 for a free estimate.

My house is near the Newport East Recreation Area and the roof gets constant salt spray. Will a metal roof hold up?
Yes, if it is specified correctly. We use standing seam or metal shingles with corrosion-resistant fasteners and coatings designed for coastal environments. Standard galvanized screws will fail quickly in Newport East, so we always upgrade to stainless steel or coated fasteners. We also pay attention to cut edges and penetrations, which are the first places to corrode.
A nor'easter peeled back some panels on my roof last winter. Can you handle emergency storm damage in Newport East?
We do storm and wind damage repair throughout Newport East. Call us at (401) 414-3310 and we will schedule an inspection as soon as possible. We can tarp active leaks, secure loose panels, and provide a written estimate for permanent repairs. We also document the damage for your insurance claim, but coverage is determined by your policy.
What does a metal roof cost for a typical three-bedroom ranch in Newport East?
For a ranch around 1,500 square feet of roof area, a basic corrugated panel roof might start around $8,000 to $10,000, while standing seam could run $15,000 to $20,000. Factors like roof pitch, number of penetrations, and whether we remove the old roof affect the price. We give you a firm number after a free inspection.
Do I need a permit to replace my roof in Newport East, and how long does it take?
Yes, a building permit is typically required for a full roof replacement in Newport East. The exact requirements and fees are set by the local building department, so we verify them before starting. Permit approval usually takes a few days to a couple of weeks, depending on the department's workload. We handle the application and inspections for you.
My neighbor's tree branches hang over my roof. What are my rights if I need to trim them for the installation?
In Rhode Island, you generally have the right to trim branches that overhang your property line, but you should check with your neighbor first and avoid damaging the tree. If the tree is on your neighbor's property and trimming could affect its health, you may need their consent. For HOA properties in Newport East, review your covenants for any landscaping rules. We can advise on clearance needed for the roof install.
Are you fully insured for work at my Newport East home?
Yes, Providence Metal Roofing is fully insured with general liability and workers' compensation coverage. This protects you in case of an accident on your property.
What maintenance does a metal roof need in Newport East's coastal climate?
We recommend an annual inspection, especially after winter. Check for loose fasteners, debris in gutters, and any signs of corrosion at seams or penetrations. Wash the roof occasionally with a garden hose to remove salt and bird droppings. We offer maintenance plans and can do a free inspection to catch small issues before they become leaks.
Why choose us?

Trusted professionals in Providence

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Providence

All your work handled by qualified professionals in Providence

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

250+ Verified Client Reviews in Providence

⭐⭐⭐⭐⭐ 4.9/5 · 250 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Providence · Response within 24h · No commitment · ☎ (401) 414-3310

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Providence ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm