Serving the Providence area  ·  (401) 414-3310  ·  Open Mon-Sun 7am-7pm
📞 (401) 414-3310 Free Quote

Metal Roofing in Kingston, RI (02881) · Local Professionals

Providence Metal Roofing · Fast response in Kingston and the Providence area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+250Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Kingston is a village where the old and the new sit close together: the green, the university, and the farm edges all within a few minutes of each other. That mix means you will find 1800s farmhouses with barns, mid-century ranches, and student rentals with low-slope roofs, all dealing with the same coastal Rhode Island weather.

Homeowners in 02881 call Providence Metal Roofing because we understand that mix. From the houses near the University of Rhode Island campus to the older homes off Kingstown Road, we have seen how nor'easters, freeze-thaw cycles, and salt air treat a roof, and we know when a repair makes sense and when it is time to plan a replacement.

Metal Roofing in Kingston (02881)

Kingston sits just inland from the bay, but the weather here still has teeth. The housing stock ranges from historic homes near the village green to working farms with outbuildings and barns, plus plenty of 1960s and 1970s ranches and capes on wooded lots. Many of these properties have mature oaks and pines close to the roof, which means fallen limbs, pine needles in the gutters, and shaded areas that stay damp longer. The freeze-thaw cycles we get in late winter are hard on flashing and fasteners, and ice dams can form at the eaves on older homes with poor attic ventilation. On the farm edges, corrugated and ribbed panels are common on barns and workshops, and those roofs take a beating from wind and wet snow. Our team has worked on standing seam, metal shingle, and corrugated panel roofs throughout the area, and we know how to match a panel profile to the building, whether it is a historic house near the green or a utilitarian barn out on a gravel road.

We serve Kingston and the surrounding Providence area, and we bring the same approach to every job: assess the roof honestly, explain the options, and do the work so it holds up to a Rhode Island winter.

Our services in Kingston

How a Job Works in Kingston

Step 1: You call us at (401) 414-3310 or request a free estimate online. We schedule an on-site assessment at your Kingston property, look at the roof from the ground and on top if it is safe, check the attic and flashing details, and talk through what we find. You get a written estimate with options, not pressure.

Step 2: Once you approve the scope, we pull the required permits through the local building department (rules vary by jurisdiction, so we verify before we start) and schedule the work. In Kingston, access can be tight on older village lots or on wooded properties with long driveways, so we plan for material delivery and staging. If your home is in a historic district or under HOA review, we help coordinate the paperwork and color choices before we order panels.

Step 3: We finish by cleaning the site thoroughly, hauling away old materials and debris, and walking the property with you to make sure you are satisfied. We leave your yard and driveway as clean as we found them, and we do a final check of fasteners, flashing, and gutters before we go.

Pricing for metal roofing in Kingston depends on the size and pitch of your roof, the condition of the decking, access, and the material you choose. As a ballpark, corrugated and ribbed panel roofing starts around $5.50 per square foot, metal roof over shingles (retrofit) starts around $7 per square foot, and standing seam starts around $10 per square foot. A standard metal roof repair or leak repair starts around $450, while screw replacement and re-fastening starts around $750. Flashing, chimney, and skylight repairs start around $600, and gutters for metal roofs start around $9 per linear foot. These are starting prices, not final quotes. The best way to get a real number is to call us at (401) 414-3310 for a free estimate. We will look at your specific roof and give you a clear, written price.

My house is near the Kingston village green and has an older roof with some rusted flashing. Can you repair it or does it need a full replacement?
We see this a lot in the older homes around the green. Often the panels are still sound but the flashing and fasteners have failed. We start with a free inspection, check the seams and penetrations, and give you an honest answer. If it is isolated, a repair with new flashing and fasteners can add years. If the rust is widespread or the decking is soft, we will explain replacement options.
A nor'easter just lifted some panels on my barn roof in Kingston. How fast can you respond?
Storm and wind damage is a priority for us. Call (401) 414-3310 and we will schedule an inspection as soon as possible, usually within a day or two depending on call volume. We can tarp or secure the area to prevent further water damage and then give you a repair estimate. We document the damage for insurance purposes if you need it.
What does a typical standing seam metal roof cost for a ranch house in Kingston?
For a ranch in the 1,500 to 2,000 square foot range, standing seam typically starts around $10 per square foot, so you are looking at a range that depends on roof complexity, pitch, and whether we remove the old roof. A simple gable roof will be on the lower end. Call us for a free estimate and we will give you a specific number for your house.
Do I need a permit to replace my roof in Kingston, and who handles it?
In most cases, a full roof replacement requires a building permit, and the rules vary by jurisdiction. We verify the requirements with the local building department before starting work and can handle the permitting process for you. If your home is in a historic district, there may be additional design review, and we will help you navigate that as well.
My neighbor's tree hangs over my roof and I am worried about liability if a limb falls. What should I do about property lines and HOA rules?
Property line issues are civil matters, so we recommend talking with your neighbor first. If you are in an HOA, check the covenants about tree maintenance and roof color or material changes. We can provide documentation of your roof condition and help coordinate with your HOA if approval is needed for a repair or replacement.
Are you insured for work on my Kingston property?
Yes, we are fully insured with general liability and workers' compensation coverage.
What maintenance should I do each year to keep my metal roof in good shape in Kingston?
Keep gutters and valleys clear of leaves and pine needles, especially after fall. Check for loose fasteners or lifted panels after winter storms, and look for rust or corrosion on older panels. We offer inspections and maintenance services, including screw replacement and re-fastening, to catch small issues before they become leaks.
Why choose us?

Trusted professionals in Providence

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Providence

All your work handled by qualified professionals in Providence

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

250+ Verified Client Reviews in Providence

⭐⭐⭐⭐⭐ 4.9/5 · 250 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Providence · Response within 24h · No commitment · ☎ (401) 414-3310

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Providence ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm