Serving the Providence area  ·  (401) 414-3310  ·  Open Mon-Sun 7am-7pm
📞 (401) 414-3310 Free Quote

Metal Roofing in Warwick, RI (02886) · Local Professionals

Providence Metal Roofing · Fast response in Warwick and the Providence area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+250Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Warwick is a city of bay-edge neighborhoods, from the tight streets of Apponaug and Pawtuxet Village to the sprawling ranches and Cape Cods off Post Road and Warwick Avenue. Most of these homes went up between the 1920s and 1950s, and their roofs take a beating from salt-laden wind, nor'easters, and freeze-thaw cycles. If you live near Oakland Beach or Conimicut, you already know how fast cheap fasteners and thin coatings give out in that air.

That's why homeowners in 02886 call Providence Metal Roofing. We're based just up the road in Providence, and we've worked on everything from low-slung ranches near T.F. Green Airport to Victorians in Pawtuxet Village. When a storm peels back a panel or a skylight starts leaking, we know the local building stock and the weather that drives the damage.

Metal Roofing in Warwick (02886)

Warwick's terrain is mostly flat to gently rolling, with a lot of small lots and tight side yards, especially in the older villages. That means access can be tricky: you might have a fence, a shed, or a neighbor's driveway two feet from the eave. The soil is sandy and gravelly in many spots near the bay, which drains well but can make ladder footing unstable. And the salt air is relentless. It corrodes cheap fasteners, eats through low-grade coatings, and works on flashing long before the panels fail. We spec corrosion-resistant fasteners and heavier coatings for properties east of I-95 and anywhere within a mile of the water.

Our team has been serving Warwick and the greater Providence area for years. We know the difference between a 1920s bungalow with skip sheathing and a 1960s ranch with plywood, and we plan the job accordingly. Whether it's a standing seam roof on a Cape Cod near Warwick City Park or a corrugated panel on a barn off Buttonwoods Avenue, we bring the right approach.

Our services in Warwick

How a Job Works in Warwick

Step 1: You call us at (401) 414-3310 or fill out the form. We schedule a free on-site assessment, usually within a couple of days. We'll walk the roof, check the attic if accessible, and look at flashing, fasteners, and drainage. You get a written estimate with options, not a high-pressure pitch.

Step 2: Once you approve, we pull the permit through the City of Warwick building department. If your home is in a historic district or you have an HOA, we help you understand the design review requirements. On installation day, we protect your landscaping, stage materials on the driveway or street (we check for any parking restrictions), and work in sections to keep the site safe. Tight lots near Pawtuxet Village or Apponaug might mean hand-carrying panels, and we plan for that.

Step 3: We clean up every day, and at the end we do a magnet sweep for nails. You get a final walkthrough, and we don't leave until you're satisfied. We leave your property clean and your roof watertight.

Pricing in Warwick depends on the job. For a typical ranch or Cape Cod, metal roof installation starts around $8 per square foot, standing seam from $10, metal roof replacement from $9, and a retrofit over existing shingles from $7. Smaller repairs like a leak fix start at $450, and screw replacement or re-fastening starts at $750. Corrugated panel roofing is the most budget-friendly at $5.50 per square foot, while copper and specialty metals start at $20. The main cost factors are roof size and pitch, access (tight lots cost more), the condition of the deck and flashing, and urgency. We give free estimates, so call (401) 414-3310 and we'll talk through your options.

My ranch near Oakland Beach has salt corrosion on the fasteners. Can you fix that without a full replacement?
Yes, in many cases. We replace the failed fasteners with corrosion-resistant screws and check the panels and washers. If the corrosion is widespread or the panels are thin, we'll tell you honestly whether a repair makes sense or if it's time to plan for replacement. We see this a lot on homes within a mile of the bay.
A nor'easter just lifted some panels on my roof in Warwick. How fast can you get out?
We prioritize storm damage calls. Call us at (401) 414-3310 and we'll schedule a free inspection, usually within 24 to 48 hours depending on volume. We can tarp or secure the area to prevent further water damage, and we document everything for your insurance claim.
What does a typical metal roof cost for a 1,500-square-foot ranch in Warwick?
For a ranch that size, a basic corrugated panel roof might run around $8,000 to $12,000 installed, while standing seam could be $15,000 to $22,000. The range depends on pitch, access, deck condition, and whether we're removing the old roof. We give a firm written estimate after a free inspection.
Do I need a permit for a metal roof in Warwick, and how long does it take?
Yes, a building permit is typically required for a full replacement or re-roof. The City of Warwick website has the current requirements, and we handle the application for you. Turnaround is usually a few business days to a couple of weeks, depending on the season. We schedule work around the permit timeline.
My neighbor's tree branches hang over my roof. What are my options if they cause damage?
In Rhode Island, you generally have the right to trim branches that overhang your property line, but check local rules first. If a branch falls and damages your roof, your insurance usually handles it. We can inspect and document the damage, and we coordinate with you on repairs. For HOA properties, review your bylaws before trimming.
Are you fully insured for work on my Warwick home?
Yes. We carry general liability insurance and workers' compensation coverage for every job.
What maintenance does a metal roof need in Warwick's climate?
Check fasteners and washers annually, especially on the south and west-facing slopes where sun and salt do the most damage. Keep gutters clear of oak and pine debris, and touch up any scratches in the coating. We offer inspection and maintenance plans, and a yearly check can catch small issues before they become leaks.
Why choose us?

Trusted professionals in Providence

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Providence

All your work handled by qualified professionals in Providence

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

250+ Verified Client Reviews in Providence

⭐⭐⭐⭐⭐ 4.9/5 · 250 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Providence · Response within 24h · No commitment · ☎ (401) 414-3310

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Providence ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm